Philadelphia, PA
Atlanta, GA
Chicago, IL
Dallas, TX
Jackson, TN
Los Angeles, CAIndustrial cleaning, painting and coatings for production plants.
Every Kelly service is performed by full-time Kelly employees, scheduled around production, and documented for the customer, the auditor, the insurer or the inspector who asked for it.
Industrial Dry Ice Blasting
Cleaning that leaves nothing behind but the contamination it removed. No water, no grit, no chemical residue, and equipment that goes back into service the moment the crew steps away.
Read moreCombustible Dust Cleaning
The finding is on your desk. The dust is on the rafters. Kelly removes it safely, documents it properly, and puts a schedule in place so the next inspection is a formality.
Read moreOverhead Cleaning and High Dusting
Everything above the line collects what the line produces. Kelly's overhead cleaning services cover the rafters, the ductwork, the fixtures and the steel, above production and without a single thing landing in it.
Read moreEquipment, Conveyor and Line Cleaning
The line is the asset. Kelly cleans conveyors, machinery and production equipment inside the window you already have, so the changeover you planned is the only downtime you take.
Read moreIndustrial Painting Services and Coatings
Industrial painting services and protective coatings that protect steel, brighten ceilings, mark hazards and survive the plant, applied by crews who paint facilities that never shut down.
Read moreFood-Grade Cleaning and Disinfecting
Cleaning that survives the audit. Overhead, equipment, drains and structure, done to your scheme, documented the way the auditor wants to see it, and scheduled around production.
Read moreIndustrial Pressure Washing
High pressure on the surfaces that can take it, with the water and everything in it contained, collected and documented rather than sent to the nearest drain.
Read moreIndustrial Vacuum Services
Explosion-rated, HEPA-filtered vacuum equipment for dust that has to be captured where it sits: in silos, pits, ducts and collectors, and in any area where the plant or the material calls for vacuum over blowdown.
Read moreBaghouse and Dust Collector Service
The collector is where the plant's dust is supposed to end up. Kelly cleans it out, inspects it, and removes and replaces the old filter bags, so the system keeps pulling the way it was designed to.
Read moreOil and Grease Removal
The film that builds until the floor is a hazard and the equipment is a fire load. Removed with the chemistry that matches the residue, and the waste handled the way the EPA expects.
Read moreIndustrial Pit Cleaning
The part of the plant nobody has opened in years. Sludge, oil and solids extracted under permit, with the space tested, attended and documented from entry to handback.
Read moreIndustrial Roof Coatings
A roof that leaks in three places does not always need replacing. A fluid-applied industrial roof coating restores it in place, from above, without a tear-off and without the plant stopping.
Read moreBoiler and Equipment Coatings
Coatings specified for the temperature they will actually see, applied inside the outage window you already have, on assets that rust quietly until they do not.
Read moreEvery service above is staffed from all six service centers. Most jobs combine two or three of them in one visit, on one plan, with one point of contact. If you are not sure which applies, call 888-422-2623 and a specialist will tell you.
Every service from
six service centers.
Every Kelly service is staffed from all six centers, so the crew that comes to your plant is the one based nearest to it. Coverage is all 48 contiguous states.
See the full territory map and the states each center covers on the service areas pages.
Tell us about the facility.
We'll tell you straight.
A specialist reviews every request, not a call center. If it is not Kelly work, we will say so and point you in the right direction.